Pre Engineering Buildings
RHS PREFAB SHED caters to the customized requirements of its clients viz. building
type, space efficiency, building utility and designing flexibility. The buildings are built
using variousframe options.
Frame Types
Pre Engineering Buildings caters to the customised requirements of its clients viz. building type, space efficiency, building utility and designing flexibility. The buildings are built using various frame options.
Clear Span (OCS)
Multispan “1” (OMS-1) (1 interior column)
Multispan “2” (OMS-2) (2 interior column)
Multispan “3” (OMS-3) (3 interior column)
Roof System (ORS)
Multigable “1” (OMG-1) (1 interior column)
Mono Slope
Lean To (OLT)
Frame Cross Section
Basic architectural measures include :
- Building Width
- The End Bay Length
- The Interior Bay Length
- The Building Height
- The Roof Slope
Anchor Bolt Plan
Pre Engineering Buildings has minimum roof live design load of 0.57kN/m2 and design wind speed of 110km/hr which are applicable in keeping with American codes. Depending on the project requirements buildings can also be designed as per IS/AISC/MBMA standards.
Structural Components
- Primary Built up Members
- Secondary Members
- Bracing Systems
Typical Rafter
Typical Column
Typical ‘Z’ section
Typical ‘C’ section
Rod bracing detail
Rod bracing
Crane Systems
Pre Engineering Buildings are designed to support any type of crane system. Overhead traveling cranes up to 20MT can be supported on brackets and higher tonnages can be supported on an independent support mechanism.
Crane supports for overhead traveling cranes include beams, brackets and bracings.
Top running crane in a multi-span building
Semi gantry crane
Top running crane in clear span building
Jib crane and monorail crane
Jib crane and monorail crane
Roof & Wall Cladding
Pre Engineering Buildings roof and wall panels form the most attractive feature of the metal building and are available in a variety of profiles and colors. Our cladding is flexibly deployed to cover roof and wall panels, interior roof and wall liners, partition panels, etc.
TRIMFLUTE
Maruti Colors
COLORPLUS™ coated steel shall have 5 microns prima paint, plus 20 microns modified polyester paint applied at the exterior (weather) surface. Interior surface of printed panels escorted with 5 to 7 microns of polyester finish.
Blue Whale
Cerulean Blue
Lagoon Blue
Canyon Red
Choc Brown
Aloe Green
Golf Green
Graphite
Dove White
Sahara Beige
Building Accessories
Pre Engineering Buildings caters to the customised requirements of its clients viz. building type, space efficiency, building utility and designing flexibility. The buildings are built using various frame options.
Translucent Panels
Turbine Ventilators
Anchor Bolts
Fasteners
Nuts & Bolts
Roll up Doors
|